Post by The GolfTouch on Nov 13, 2002 16:08:32 GMT 1
Neen, EO mean that abbonement closed. E1 decoder other reasons are closed (by defect?)E2 is a child lock. E3 is a jamming of cable company
--- --- --- --- --- --- --- --- ---
Replying to:
ON THE VER 1.3
if it is not flashing E0 it will not work???
or if it is E1 OR E3.... HOW CAN WE MAKE IT EO?
--- --- --- --- --- --- --- --- ---
Replying to:
I made modifications(El Pibe) last saturday and everything's ok. I didn't find exactly the names that was used by our friends(in the original file there weren't chip's names), but I assure you that in revision 1.3 audio channel(s) is half-perfectly decoded.
--- --- --- --- --- --- --- --- ---
Replying to:
there is not sound with this mod!!!!
i see that everybody is very confused with these two new mods. what i found out is that there are some "mistakes" on the mods.
there is no IC801 or 7301 or 7202. on my board which is v1.4 the layout and the chip positions are exactly the same.if you take out from 7031 the first digit (7)then you have IC301 which is an 4066 chip. the same is with the 7202 which is IC202 and its is also an 4066 chip. the chip that is called IC801 is the IC202 one.
i made the mod like this , i had video but not sound. i didn't have the time to work with the other mod (the one with the trimmer).
i think that the mod if it works it sould work in all versions because all the boards have two of 4066 chips (they are used for opening and closing the gates of digital audio for left and right channel).
the author sould give us more details.
i have to tell you that first i removed the previous mod and i sterted from blank
--- --- --- --- --- --- --- --- ---
Replying to:
Strange that it didn't work at my comcrypt :S... i see you have used my mod.
my video was verry badly, al sorts of lines trough the screen.....
grtz pjott..
--- --- --- --- --- --- --- --- ---
Replying to:
I tried the modification and it's ok.
When the modifcation is done, the decoder lose audio sometimes. But now(2 hours after modification) everything is ok, audio never lost. I can mistake, however.
What you have to do is relatively simple:
1) Your Comcrypt 4000 rev. 1.3 must flash on its display "E0", so you have to restore the original status of your decoder if you made any modification.
2) locate IC801(use the picture to localize this component):
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black, 1/4 watt seem to be good).
3) Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).
4) Locate IC301(use the picture to localize this component):
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM(1/4 watt seem to be good) toward pin 10 of IC301.
solder pin 8 and 9 together
***
Video(with this modification) is less good than of golftouch.nl, but with this modification there's audio and altogether is very good.
To have the picture of the modification send me an e-mail.
Comcrypt 4000 rev. 1.3 is completely working.
--- --- --- --- --- --- --- --- ---
Replying to:
ON THE VER 1.3
if it is not flashing E0 it will not work???
or if it is E1 OR E3.... HOW CAN WE MAKE IT EO?
--- --- --- --- --- --- --- --- ---
Replying to:
I made modifications(El Pibe) last saturday and everything's ok. I didn't find exactly the names that was used by our friends(in the original file there weren't chip's names), but I assure you that in revision 1.3 audio channel(s) is half-perfectly decoded.
--- --- --- --- --- --- --- --- ---
Replying to:
there is not sound with this mod!!!!
i see that everybody is very confused with these two new mods. what i found out is that there are some "mistakes" on the mods.
there is no IC801 or 7301 or 7202. on my board which is v1.4 the layout and the chip positions are exactly the same.if you take out from 7031 the first digit (7)then you have IC301 which is an 4066 chip. the same is with the 7202 which is IC202 and its is also an 4066 chip. the chip that is called IC801 is the IC202 one.
i made the mod like this , i had video but not sound. i didn't have the time to work with the other mod (the one with the trimmer).
i think that the mod if it works it sould work in all versions because all the boards have two of 4066 chips (they are used for opening and closing the gates of digital audio for left and right channel).
the author sould give us more details.
i have to tell you that first i removed the previous mod and i sterted from blank
--- --- --- --- --- --- --- --- ---
Replying to:
Strange that it didn't work at my comcrypt :S... i see you have used my mod.
my video was verry badly, al sorts of lines trough the screen.....
grtz pjott..
--- --- --- --- --- --- --- --- ---
Replying to:
I tried the modification and it's ok.
When the modifcation is done, the decoder lose audio sometimes. But now(2 hours after modification) everything is ok, audio never lost. I can mistake, however.
What you have to do is relatively simple:
1) Your Comcrypt 4000 rev. 1.3 must flash on its display "E0", so you have to restore the original status of your decoder if you made any modification.
2) locate IC801(use the picture to localize this component):
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black, 1/4 watt seem to be good).
3) Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).
4) Locate IC301(use the picture to localize this component):
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM(1/4 watt seem to be good) toward pin 10 of IC301.
solder pin 8 and 9 together
***
Video(with this modification) is less good than of golftouch.nl, but with this modification there's audio and altogether is very good.
To have the picture of the modification send me an e-mail.
Comcrypt 4000 rev. 1.3 is completely working.
io ho un comcrypt 4000 rev 1.3 7044500 2