Post by eppo2001 on May 1, 2003 16:39:26 GMT 1
Hi, Found this in an old forum:
groups.google.com/groups?q=comcrypt+audio&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&selm=19981120185330.9048.qmail%40hotmail.com&rnum=2
Don't know if it works because i don't have a comcypt 4000 decoder.
groups.google.com/groups?q=comcrypt+audio&hl=en&lr=lang_en&ie=UTF-8&oe=UTF-8&selm=19981120185330.9048.qmail%40hotmail.com&rnum=2
Don't know if it works because i don't have a comcypt 4000 decoder.
Hi, I have two decoders mod. Comcrypt 4000,
I buy the first one in december 1995 and it works without subscription
becouse in those stock there was a firmware error.
For work it the step are:
1 - You must memorize on Pr1 the channel of crypted TV;
2 - You must go on test signal programm (display show "rr");
3 - You must disconnect the antenna cable then connect it again, now the
decoder works with double audio and decrypted video perfectly (only with
the scart connector).
The second one (I buy it in 1997) don't work with previous metod becouse
the firmaware error is now correct.
I have modify the decoder and I can see the video decrypted with any
inversion, without audio (good for luxcrypt decoder without digital
audio).
The modify are:
1 - You connect for one second the pin 18 of DELTA 5.4 with pin 2 of IC
MM74HCT574N (between the display module and access module) this removed
the black screen. This could reset the decoder, try again.
2 - You connect the pin 22 with pin 23 of DELTA 5.4 now the video is
decrypted with any inversion.
If you connect pin 19 with pin 20 of DELTA 5.4 you can inverted the
video.
Do you know a metod to eliminate the continous inversion?
Tony
I buy the first one in december 1995 and it works without subscription
becouse in those stock there was a firmware error.
For work it the step are:
1 - You must memorize on Pr1 the channel of crypted TV;
2 - You must go on test signal programm (display show "rr");
3 - You must disconnect the antenna cable then connect it again, now the
decoder works with double audio and decrypted video perfectly (only with
the scart connector).
The second one (I buy it in 1997) don't work with previous metod becouse
the firmaware error is now correct.
I have modify the decoder and I can see the video decrypted with any
inversion, without audio (good for luxcrypt decoder without digital
audio).
The modify are:
1 - You connect for one second the pin 18 of DELTA 5.4 with pin 2 of IC
MM74HCT574N (between the display module and access module) this removed
the black screen. This could reset the decoder, try again.
2 - You connect the pin 22 with pin 23 of DELTA 5.4 now the video is
decrypted with any inversion.
If you connect pin 19 with pin 20 of DELTA 5.4 you can inverted the
video.
Do you know a metod to eliminate the continous inversion?
Tony