pol
Junior Member
Posts: 10
|
Post by pol on Nov 7, 2003 12:50:31 GMT 1
******************************************* 1- trimmer 220k 1- resistance 1 Mohm 1- resistance 560 ohm
Connect the trimmer with cursor to jumper 9305 and the remaining two contacts respectively to bridge 5v and to mass gnd.
On delta 5.4 (cf74055a) build a bridge between pin 16 and 17, disconnect pin 18 and connect the relative track to pin 33.
Turn the plate and individualize two 74hc4066n.
At 7202 build a bridge pin 1 and 2 put a resistance 1 Mohm between pin 3 and pin 4.
At 7301 put a resistance 560 ohm between pin 1 and pin 2 and build a bridge pin 8 and 9.
If it's necessary (for video), adjust the trimmer. *********************************************
Audio works but sometimes (every 27-34 seconds) there's an annoying noise.
Could you help me? Why nobody is able to solve this probrem? It's impossible?
thanks in advance
|
|
gmav
New Member
Posts: 3
|
Post by gmav on Mar 28, 2004 12:49:16 GMT 1
Hi all Pol is your mod description for audio crack working?? I have the v1.4 decoder..
|
|
gmav
New Member
Posts: 3
|
Post by gmav on Mar 28, 2004 12:52:34 GMT 1
pol the noise you hear is for long time? for how much you hear the anoying sound??
|
|