pol
Junior Member
Posts: 10
|
Post by pol on Oct 12, 2003 10:22:01 GMT 1
THE MODIFY IS OK (AUDIO AND VIDEO), BUT SOMETIMES THERE IS AN AUDIO NOISE (EVERY 10-30 SECONDS), MAYBE SOMEONE WHO'S BETTER THAN ME, COULD SOLVE THIS PROBLEM.
_________
For comcrypt 4000 (8211 248 42763 printed)
You need:
1- trimmer da 220k
1- resistance da 1 mhom
1- resistance da 560 hom
connect trimmer with cursor at jumper 9305 and the others pins to 5v and gnd.
on delta 5.4 (cf74055a) join pins 16 e 17
isolate pin 18 and join the copper line with pin 33.
Now you you have to look for two 74hc66n:
7202 and 7301.
at 7202 join pin 1 and 2 and to put the resistor (1 M) between pin 3 and pin 4.
al 7301 to put the resistor (560 ohm) between pin 1 and pin 2.
join pin 8 and 9.
If necessary (for video) regulate the trimmer.
|
|
|
|
Post by extreme on Oct 16, 2003 6:55:52 GMT 1
I tryed this mod. and I have same problem.
I hope somebody can help us...
|
|
|
|
Post by gallo on Oct 18, 2003 10:57:13 GMT 1
Is nobody able to really crack the audio?
I'm very deluded...
|
|
|
|
Post by Bradipo82 on Oct 23, 2003 9:48:30 GMT 1
Hi pol! You are the best! finally i have the decoder with audio and video ok! i have the comcrypt 4000 (8211 248 42763 printed) and the modify is perfect!.. tnx..  |
|
pol
Junior Member
Posts: 10
|
Post by pol on Oct 27, 2003 12:31:16 GMT 1
Ciao Bradipo82.
Penso tu sia italiano....
Hai anche tu delle interruzioni dell'audio ogni 20-30 secondi?
|
|
cost
New Member
Posts: 2
|
Post by cost on Apr 21, 2005 17:15:57 GMT 1
Hi pol! You are the best! finally i have the decoder with audio and video ok! i have the comcrypt 4000 (8211 248 42763 printed) and the modify is perfect!.. tnx.. Hello brandipo I have the comcrypt 4000 but I don't have sound.Can you send me with email the schematic or crack for the sound. e-mail sheet@panafonet.gr thanx |
|
|
|
Post by Epistimon on May 3, 2005 17:18:26 GMT 1
[glow=red,2,300]UPDATE[/glow] VISIT NOW www.lima.esmartdesign.com/For all crack!!!!! and new ver5 H selida ananeothike tora kai to neo crack ver5!!! |
|
|
|
Post by elpis2 on Aug 13, 2005 17:27:56 GMT 1
giati the vazete ke mia fotografia apo ta kiklomata step-by-step etsi oste na ine pio efkolo ke gia emas pou the katexoume ke polla apo kiklomata. mporite na kanete upoload oti file thelete gia free sto www.yousendit.com/ |
|
joe05
Full Member
Posts: 52
|
Post by joe05 on Aug 14, 2005 0:36:34 GMT 1
|
|
|
|
Post by mck on Mar 9, 2006 13:59:18 GMT 1
THE MODIFY IS OK (AUDIO AND VIDEO), BUT SOMETIMES THERE IS AN AUDIO NOISE (EVERY 10-30 SECONDS), MAYBE SOMEONE WHO'S BETTER THAN ME, COULD SOLVE THIS PROBLEM. _________ For comcrypt 4000 (8211 248 42763 printed) You need: 1- trimmer da 220k 1- resistance da 1 mhom 1- resistance da 560 hom connect trimmer with cursor at jumper 9305 and the others pins to 5v and gnd. on delta 5.4 (cf74055a) join pins 16 e 17 isolate pin 18 and join the copper line with pin 33. Now you you have to look for two 74hc66n: 7202 and 7301. at 7202 join pin 1 and 2 and to put the resistor (1 M) between pin 3 and pin 4. al 7301 to put the resistor (560 ohm) between pin 1 and pin 2. join pin 8 and 9. If necessary (for video) regulate the trimmer. Can anybody tell me if the above (video & sound) crack works for comcrypt 4000m ver. 2.4???if you have any further info pls provide! |
|
Ïëá å÷ïõí åéðùèåé ôïóï ðïëõ...Åî" áëëïõ åéíáé ôïóï áðëç ç äéáäéêáóéá ôïõ "Crack"....Ç ãëùóóá ôïõ OSA å÷åé "ìáëëéáóåé"... ÅÐÉÌÏÍÇ-ÕÐÏÌÏÍÇ... 