Post by pjott on Nov 12, 2002 19:10:28 GMT 1
During some time i recive mails about this mod, as far as i know is DOESN'T WORK at all...
i'm sorry.......
--------------------------------------------------------------------
HI all
here i poste agian the mod for the comcrypt 4000 i posted in the other forum...
i've heard from some people it works and some say it doesn't work..
I don't know since i blowed up my audiodac long time ago with some experiment.
please post your comments....
--------------------------------------------
Comcrypt 4000 mod based on specification found in e-mail and coded to mij comcrypt:
locate IC801:
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black).
Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).
Locate IC301:
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM toward pin 10 of IC301.
solder pin 8 and 9 together
DUTCH !!
---
localiseer ic801
soldeer pin 1 & 2 samen
tussen pin 3 en 4 een weerstand plaatsen van 15 ohm
localiseer delta chip
maaak pin 18 los
onderbreek de koperlijn naar pin 18 en reroute deze naar pin 33
soldeer pin 16 aan 17
maak een draadverbinding van pin23 naar testpunt T47 (schakelaar voor instellingen van zenders)
localiseer IC301:
vind trimmer 219 (zie bovenzijde links)
neem hiervan de pin die vast zit aan smd weerstand R226 en maak MET EEN 2K2 WEERSTAND EEN VERBINDING naar pin 10 van ic301
soldeer pin 8 en 9 samen.
Dit is gebaseerd op de de e-mail, en omgecodeerd naar mijn comcrypt...
kweet niet of het werkt, laat het even horen.
grtz Pjott..
i'm sorry.......
--------------------------------------------------------------------
HI all
here i poste agian the mod for the comcrypt 4000 i posted in the other forum...
i've heard from some people it works and some say it doesn't work..
I don't know since i blowed up my audiodac long time ago with some experiment.
please post your comments....
--------------------------------------------
Comcrypt 4000 mod based on specification found in e-mail and coded to mij comcrypt:
locate IC801:
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black).
Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).
Locate IC301:
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM toward pin 10 of IC301.
solder pin 8 and 9 together
DUTCH !!
---
localiseer ic801
soldeer pin 1 & 2 samen
tussen pin 3 en 4 een weerstand plaatsen van 15 ohm
localiseer delta chip
maaak pin 18 los
onderbreek de koperlijn naar pin 18 en reroute deze naar pin 33
soldeer pin 16 aan 17
maak een draadverbinding van pin23 naar testpunt T47 (schakelaar voor instellingen van zenders)
localiseer IC301:
vind trimmer 219 (zie bovenzijde links)
neem hiervan de pin die vast zit aan smd weerstand R226 en maak MET EEN 2K2 WEERSTAND EEN VERBINDING naar pin 10 van ic301
soldeer pin 8 en 9 samen.
Dit is gebaseerd op de de e-mail, en omgecodeerd naar mijn comcrypt...
kweet niet of het werkt, laat het even horen.
grtz Pjott..