AUDIO CRACK !!!

[pjott]

During some time i recive mails about this mod, as far as i know is DOESN'T WORK at all...
i'm sorry.......

--------------------------------------------------------------------




HI all
here i poste agian the mod for the comcrypt 4000 i posted in the other forum...
i've heard from some people it works and some say it doesn't work..
I don't know since i blowed up my audiodac long time ago with some experiment.
please post your comments....
--------------------------------------------

Comcrypt 4000 mod based on specification found in e-mail and coded to mij comcrypt:

locate IC801:
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black).

Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).

Locate IC301:
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM toward pin 10 of IC301.
solder pin 8 and 9 together



DUTCH !!
---
localiseer ic801
soldeer pin 1 & 2 samen
tussen pin 3 en 4 een weerstand plaatsen van 15 ohm

localiseer delta chip
maaak pin 18 los
onderbreek de koperlijn naar pin 18 en reroute deze naar pin 33
soldeer pin 16 aan 17
maak een draadverbinding van pin23 naar testpunt T47 (schakelaar voor instellingen van zenders)

localiseer IC301:
vind trimmer 219 (zie bovenzijde links)
neem hiervan de pin die vast zit aan smd weerstand R226 en maak MET EEN 2K2 WEERSTAND EEN VERBINDING naar pin 10 van ic301
soldeer pin 8 en 9 samen.

Dit is gebaseerd op de de e-mail, en omgecodeerd naar mijn comcrypt...
kweet niet of het werkt, laat het even horen.

grtz Pjott..

[Alle]

Thanxs pjott,
but there is a problem, i can't find on my comcrypt 4000 the testpoint T47 and the trimmer R229.
If you want i can send you a pic of my decoder with the modify that i did drawed on it.
Give me an address.
Thanxs

[Pjott]

Hi Pjott, thanx for the info, however u make rference to ic801, in my box there is no ic801? could u tell me what make the ic is so's i can locate it? plse.

[HKRSA]

hi pjott, i have followed ur instructions for the audio hack. what i have come up with is a narrow line running down the left side of centre of the screen, and the audio seem to be out of sync or phase, the line being about 1/2 inch wide, however when i depress the prog button, the picture appears. that i think is due to the wire connected to test point 47. is there an adjustment through a trimmer that can get the audio in sync?
awaiting ur reply.
thanx
HK

[matchless]

hello..
i tried the audio hack but no sound.also the picture is inverted.do i need undo the preveous hack?and do i need the auto polarity?i've a rev 2.3

[Senaka]

In my decoder E1 is flashing
How to changing it to E0 to make the modification work.
From Sri Lanka. Decoder Comprypt 4000 Delta 5.4
Thanks...

[gustone]

pjott said:

HI all
here i poste agian the mod for the comcrypt 4000 i posted in the other forum...
i've heard from some people it works and some say it doesn't work..
I don't know since i blowed up my audiodac long time ago with some experiment.
please post your comments....
--------------------------------------------

Comcrypt 4000 mod based on specification found in e-mail and coded to mij comcrypt:

locate IC801:
solder pin 1 and 2 together
between pin 3 and 4 put a resistance of 15 Ohm (brown-green-black).

Locate the (big) delta chip:
release pin 18.
cut the copper line to pin 18 and reroute this line with a wire to pin 33 of the delta chip (same chip).
solder pin 16 and pin 17 together.
make a wire route from pin 23 to testpoint T47 (is located next to the channal down button ).

Locate IC301:
Locate trimmer R219 (so on topside to locate at the left):
take the pin that's connected to the smd resistance R226 with a RESISTANCE OF 2K2 OHM toward pin 10 of IC301.
solder pin 8 and 9 together



DUTCH !!
---
localiseer ic801
soldeer pin 1 & 2 samen
tussen pin 3 en 4 een weerstand plaatsen van 15 ohm

localiseer delta chip
maaak pin 18 los
onderbreek de koperlijn naar pin 18 en reroute deze naar pin 33
soldeer pin 16 aan 17
maak een draadverbinding van pin23 naar testpunt T47 (schakelaar voor instellingen van zenders)

localiseer IC301:
vind trimmer 219 (zie bovenzijde links)
neem hiervan de pin die vast zit aan smd weerstand R226 en maak MET EEN 2K2 WEERSTAND EEN VERBINDING naar pin 10 van ic301
soldeer pin 8 en 9 samen.

Dit is gebaseerd op de de e-mail, en omgecodeerd naar mijn comcrypt...
kweet niet of het werkt, laat het even horen.

grtz Pjott..
hi all from greece.
did you have something (plans or anything else for sound) about cable crypt2 or comcrypt4000.4000 it's completly different from 4000m

[vagool]

Is it possible for you to provide us with any pictures of what you have done?Thanks

[lampadinac]

On my comcrypt 4000 rev 1,3 i cannot identify ic301, ic801, r219 and t47 because i have dirrerent reference number like 7301, 4701 etc. Please can You send me or a schematic or a picture or a convertion table.
Thanks a lot

[spikey65]

wie kan dit vertalen: From pin 18 of the Delta chip starts a copper line witch splits in two in a certain point. We cut it at the point that goes to the cpu board and connect to ground the pin of the cpu board that this line goes to.

[chamal66]

[glow=red,2,300]i got a great way 2 modiffy comcrypt decoders see the sound(comcrypt audio) pages man
hey i like to try your mod can you send me the audio and video mod to
[/glow]
[glow=BLUE,2,300][e-mail] [/glow]


thanks a lot friend in advance

CHAMAL_DARSHANA(SRI LANKA)

[motsatos]

I have a comcrypt 4000m ver2.4 this crack work in this decoder for sound? pls tell me.

[Pharaoh]

Hi,

This method is just fake.
It will not work.
Sorry

Bye

[pjott]

'don't understanbd why people don't read this thread completly...

in the first two line's i have edited a few month's ago that the crack didn't work...

and still people are asking things about it :S

Paroah, you havn't got a hack that works with sound ??

grtz pjott..

[Pharaoh]

Hi pjott,

Not yet.
But Martiez Napez told me that someone hack it for all comcrypt versions.
He will publish his hack in 3 weeks at Martiez website.
We will wait to see

Bye